Veröffentlicht am Schreib einen Kommentar

Panzer Assault Badge Bronce 25 Juncker

 

Hi Friends, today I am very happy to present you an article which was written by a good friend who helped me to get this blog more intersting for you. Please enjoy !

 

Dear collectors

Today I would like to present another badge that is rarely seen: a bronze PAB „25“ made by the company of C.E. Juncker. Unlike the bronze PAB „25“ from JFS or from Gustav Brehmer which pop up from time to time only very few examples from Juncker are known to exist.

Panzergrenadiers after Combat

Numbered PABs were instituted on 22nd of June 1943 and Juncker examples – in contrast to their JFS and G.B. counterparts – are supposed to be the earliest awarded and actually worn pieces. At least this is what evidence shows based on groupings with documents.

Whereas numbered PABs in silver can be encountered quite often numbered bronze PABs are rare on their own. Why is this so?

If you look at the first grade – the PABs without numbers – the ratio beween existing examples in bronze and silver is roughly 1:1.

Panzer Assault Badge Bronce 25 by Juncker Front view

Now when it comes to the second grade (not to mention the third or even the fourth grade) the ratio changes considerably and is about 1:20 (estimated). This applies to single pieces. The ratio for PABs „25“ in groupings is more like 1:50.

The award criteria for a numbered PAB in bronze bring up the answer.

Solbuch Entry and PA Days from Sebastian`s Collection (2)

The exact regulations were not really dealt with in the literature up to now and on top of that there were several changes to them over the course of time. Thus it is not possible to provide any really precise information but generally speaking there were the following units that were eligible for awarding bronze PABs:

  • Aufklärungs-Abteilungen
  • Schützen-Regimenter
  • Panzergrenadier-Regimenter
  • Panzerspäh-Einheiten
Panzeraufklärer sdkfz 222 Africa

The first grade was won after taking part in at least three assaults on three different(!) days. For a second grade PAB a soldier had to take part in a minimum of 25 assaults on 25 different days. The day the crediting began was the 1st of July 1943. There were exceptions for those who were killed or got severely wounded and thus would not have a chance any more to take part in further combat. The required minimum for a second grade was 18 days in this case.

Russia, Kradschützen on the March 1942 / picture from the Bundesarchiv

Furthermore a certain amount of days could be credited generally for those who served in Russia or in Africa without interruption – depending on the length of time:

  • 10 days for 8 months of service
  • 15 days for 12 months of service
  • 25 days for 15 months of service

 

(cf. Klietmann 1991)

Solbuch Entry and PA Days from Sebastian`s Collection (1)

Unlike in panzer-units the soldiers in the units mentioned above had practically no real protection when engaged in combat. There were quite many guys serving in these units but it was a serious business and only very few were granted to fulfil the criteria for a higher grade…

 

Now back to the badge starting this thread:

It shows only slight traces of wear – the bronze finish is preserved extremely well and only the high points expose the base metal: zinc. All the typical production related traits are present that can be encountered on almost any other Juncker made award. The details are well pronounced and aesthetically pleasing. The whole badge has a certain depth which makes it look more substantial than any JFS or G.B made PAB.

Panzer Assault Badge Bronce 25 by Juncker Backview

When it comes to numbered Juncker badges there is also a certain variety among them. In this case the number shield is magnetic (it can be encountered unmagnetic as well) and soldered into the little box. Earliest examples feature a hole in this box intended for the number shield to be riveted rather than soldered. Apparently this idea was soon overruled.

The rivets which hold the tank in its place are made of aluminium and penetrating which means that they can be seen from both sides: obverse and reverse. They are correct in form and size.

PAB 25 Bronce in wear from Philippe de Bock`s Book The German Panzer Assault badge of World War II

The catch is made of round wire fixed to a round base plate whereas other examples may feature a flat wire catch. Everything is textbook (cf. De Bock 2009).

 

I bought this particular piece from a dealer at the show in Ulm last year. This is the only thing about it that I know for sure. What I don‘t know: who was the man who earned it? What happened to him? If it only could speak…

 

 

 

Bibliography:

De Bock, Philippe: The German Panzer Assault Badge of World War II, Pap Jay Publishing (Belgium) 2009

Klietmann, Kurt.-G.: Auszeichnungen des Deutschen Reiches 1936-1945, 6th ed., Stuttgart 1991

Big Thanks to collector friends who helped out with pictures and documentation but they like to stay in the shadow, what I understand !

Subscribe for more 😉

Best

Sascha

Veröffentlicht am Schreib einen Kommentar

Cholm Shield / short M and long M

Hi Gentleman and a happy new year 2018. Hope you all found a good way into the New Year with you families and friends.

My first short M Cholmshield

Now it is time to go back to our hobby. For this posting I picked a combat award which has a long story. Not because it is ultra rare (well it is rare), but obviously it takes some time to get it.

Generalmajor Scheerer with zinc shield

But let`s start at the beginning.

Back in time when I was a young boy about twelve years old I sat together with my grandfather “Opa Walter” in his garden. He was an army veteran of the 30. Infantrie Division and fought on the eastern front. There he lost most of his right leg when he was wounded by a splinter.

He told me about that time only a little bit, because he got always very shaky talking about his years on the eastern front. But that day he explained when he was hit and at which place it happened. It was the fighting in the pocket of

First draft of Cholmshield

Demjansk where he was wounded and later on (luckily) taken out by a plane. In his estate there was not such a combat award as a Demjanskshield, no paperwork about the battle or any entry in his Soldbuch. Later on I found out more about the Demjansk battle and what happened there. That raised my interest on shields of World War II.

Starting my collection I tried to get the Demjanskshield

and that was not impossible. So I got more and more Information about shields and my shield collection grew.…..not so much were awarded….easy task I thought…..I was wrong.

Generalmarjor Scheerer and Rottwachtmeister Schlimmer

But I have to admit it must always be an award which fits in the own collection, so a nice one, better worn than unworn in a good condition. Narvik, Krim, Kuban, Demjansk came quick, Lappland has to be an estate (that way you get a little bit more proof that it “may” a war time piece), Lorient is nearly impossible to get one, Dünkirchen is more a cap badge than a shield….but if I could get one I would take it.

So you figure it out, it is the Cholmshield which was TOP of my list. Hard to get one in the version which was given to the fighters of the Cholm battle (so a short M version) in the condition 2+. Maybe not so hard for some of you, but with a small wallet it will take some time.

Document Cholmshield Hans Grewe

A good friend told me:”It takes time, but like a knights cross…. someday it will come to you”. In all the years I bought 4 Knight crosses from private (I kept only two of them), and also a paper grouping from a Cholm fighter….but never ever a Cholmshield for my collection.

One day before Christmas 2017 I checked my collection and also the drawer “I better put this grouping aside for later…..” I think everybody has such a drawer with things inside which are not your field of collection but toooooo nice to give it away….maybe later.

I found a grouping I could let go to raise some money for buying other things for my collection. Checking Christian von Eickes web shop Militaria Berlin I finally found THE Cholm shield I was looking for. The price was OK and we did a trade……and I got my first Cholmshield, short M, fabric backing condition 2+ !!!

Happy Christmas time for me!!!!

But after you read the whole story how I got mine, here is some more information to the Cholm mystery and maybe you can learn a little bit

History about the Cholm battle:

During the first week of December 1941 Marshall Zhukov launched Operation Typhoon and, in combination with appalling weather, pushed the invading Wehrmacht back from the gates of Moscow. In the North on the Southern Flank of Heeresgruppe Nord the German 16th Army reeled under the blow, conceding ground but not the two primary routes through the swamps covering the area between Seeliger See and Ilmen See. These routes ran through the towns of Demjansk and Cholm.

Iron Cross 1st class awarded in Cholm

At Cholm,  a force of just 5,500 men under the command of Generalmajor Theodor Scherer, though completely surrounded, held out for 105 days withstanding 100 infantry attacks (42 of which were supported by tanks). When the garrison was relieved, only 1,200 survivors remained. Throughout the ordeal the besieged men were supplied by air, and in the absence of heavy weapons, were supported by artillery 10 miles away in the main German lines. Following this epic battle Scherer was awarded a Knight’s Cross and his men were feted as heroes all over Germany.

These are the units which fought in the battle as follows:

  •  Parts of the 123. ID (Grenadier Regiment 416, Artillerie Regiment 123)
  • Parts of the 218. Infanterie Division (Stab Grenadier Regiment 386 with the 13 & 14 Kompanie Grenadier Regiment 386)
  • A „Fahrrad Bataillon“ from „Aufklärungs Abteilung 218“
  • The “Gebirgs Jagdkommando 8”
  • Parts of the Reserve Police Bataillon Cholm
  • A “Marine Kraftfahrer” Unit

Various other units or parts of units (mostly from stragglers) were present in the pocket as well.  During the course of the struggle, there was also an influx of a few new troops from parts of units flown in, as well as personnel attached to the K.G.z.b.V 172 (such as the glider pilots).  It is stated in the German literature that over 60 units where present in the pocket, varying in size from small to large.

Cholmfighter with Panzervernichter and Cholmshield

But let`s go back to the Cholm Shield itself. Who had the idea, how was it made and so on…

The basic Idea came from Generalmajor Theodor Scherer and the design was made by Polizei-Rottwachtmeister Schlimmer of the Reserve-Polizei-Bataillon Cholm. The draft was revised by Prof. Klein from Munich. He change the looking direction of the eagles head (if the shield is on the left sleeve of the jacket, the eagles head would look to the back, but Hitler liked it the other way, the eagle has to face the frontline…..) . He also changed the size of the shield.  The draft was as long as the Narvikshield, so he made it a little bit shorter.

All shields were hollow and slightly concave to better fit on the sleeve of the uniform. Different manufacturers used different metals in the manufacture of the shields, and they can be found in earlier stamped white iron versions, which are magnetic and later shields of zinc, both versions were washed in silver. A backing plate was attached to the shield, between these was placed a piece of colored fabric. On the backside we find short prongs and long prongs. Also there are shields with paper backing and fabric backing.

Very important for us collectors is to spot an original from a copy. Original Cholm shields are very expensive; buying a post war shield is terrible and a hard lesson for you and hard on your wallet.

So here you go with what the collector`s world found out and what is in parts written in different Magazines and Online Forums. We have three major differences:

Long M and short M of Cholmshield compared

1.  Cholm Shield magnetic with short M (this is the award type given to the troops)

2 . Cholm Shield made from zinc short M / dark surface and different shape of the fabric

3. Cholm Shield magnetic with long M / flaw in the swastika

I have to admit that are Cupal made shields out there but I am not so much into this cupal theory, so lets save that when the collectors world found out more.

If you look close to a number 1 Cholm shield you will notice some embossed errors, easy to spot. Under the wing and on the left side of the shield / edge.

Wing with flaws / edge with flaw on short M shields

If you look at the zinc version or number 2, after all the years the basic zinc material is dark and the fabric shows a different shape then number 1 and 3.

If you look close to a number 3 Cholm shield you will notice a flaw in the swastika. Right lower gap between the swastika arms there is something you can see.

Flaw in Swastika lower right on long M shields

Also to identify a copy is that you have to check the eagles head. Some eagles look like they have a helmet on….which is not good. On some copy shields the eagle claws are not crossed in the middle light they should. Copy`s very often don`t have the details like an original.   And……if the Price is very low you have to look twice……almost everyone knows that you pay for a good one 1800,- until 2800,- and more (depends on the condition). So if one is offered for 1000,- Euro and below, you warn signal has to go off and makes noise like hell.

I remember the Kassel fair in November 2017 where I was looking for a good one for my collection. I found some cheap copy`s (which are marked as postwar) but also a table where Cholm shield were offered for 1000,- Euro a piece in TOP condition. I did not make an effort to take it for an „in hand inspection“. They were fakes and the seller knew it but they tried to sell them……well, I won`t forget that.

Here are some original Cholmshields

 

And here are some BAD Cholmshield / FAKE Cholmshields

Buttom line my friends, try to remember these things when you buy a Cholm shield somewhere or buy at a trustworthy dealer. That way you will be happy all the way.

Subscribe for more 😉

Best

Sascha